title

بررسی عمق کیور و ثبات رنگ رزین‌کامپوزیت‌های بالکفیل فلو حاوی نانوذرات (Ag/ ZnO/ 4A zeolite و TiO2/ ZnO/ 4A zeolite )

رهبر, مهدی ، دباغی تبریز, فاطمه ، کامران, عزیز ، سلیمی, فاطمه (1401) بررسی عمق کیور و ثبات رنگ رزین‌کامپوزیت‌های بالکفیل فلو حاوی نانوذرات (Ag/ ZnO/ 4A zeolite و TiO2/ ZnO/ 4A zeolite ). دکتری حرفه ای (پایان نامه) دانشگاه علوم پزشکی اردبیل.

متن کامل






[img]
پیش نمایش
متنی - گزارش نهایی طرح تحقیقاتی/ پایان نامه
2MB
[img]
پیش نمایش
متنی - گزارش نهایی طرح تحقیقاتی/ پایان نامه
2MB
[img] متنی - گزارش نهایی طرح تحقیقاتی/ پایان نامه
محدود به فقط پرسنل سامانه

2MB
[img] متنی - گزارش نهایی طرح تحقیقاتی/ پایان نامه
محدود به فقط پرسنل سامانه

1MB
[img] سایر (spss) - فایل ضمیمه
محدود به فقط پرسنل سامانه

1kB

آدرس اینترنتی رسمی : https://lib.arums.ac.ir/cgi-bin/koha/opac-ISBDdeta...

خلاصه فارسی

مقدمه: با بهبود خصوصیات رزین‌کامپوزیت‌ها، این‌ماده بصورت گسترده به‌عنوان مواد ترمیمی زیبایی استفاده می‌شوند. با این حال تغییر رنگ رزین‌کامپوزیت‌ها یکی از مهم‌ترین دلایل شکست این ترمیم‌ها است. از طرفی رزین‌کامپوزیت‌ها معایبی ازجمله عمق‌نفوذ نور محدود دارند که برای غلبه بر این‌مشکل، رزین‌کامپوزیت‌هایی با عمق‌کیور بالا تحت عنوان کامپوزیت‌های بالکفیل به بازار عرضه شده‌است. مطالعات انجام‌شده روی برخی نانوذرات نشان‌داده که اضافه‌کردن نانوذره روی به رزین‌کامپوزیت‌ها خواص مکانیکی و نوری آن‌ها را ارتقا می‌دهد و نانوذره تیتانیوم‌اکساید، خواص ظاهری و زیبایی مطلوبی از خود نشان می‌دهد. علاوه بر این، زئولیت با کپسوله کردن ذرات اکسیدفلزی در خود به حفظ این‌ویژگی‌ها در ترکیب کمک می‌کند. از این‌رو این‌مطالعه با هدف بررسی عمق‌کیور و ثبات‌رنگ کامپوزیت‌رزین های بالکفیل حاوی نانوذرات Ag/ ZnO/ 4A zeolite و TiO2/ZnO/ 4A zeolite انجام گردید. مواد و روش ها: پس از سنتز نانوذرات، رزین‌کامپوزیت بالکفیل فلوopus با نانوذرات (Ag/ ZnO/ 4A zeolite و TiO2/ ZnO/ 4A zeolite ) با دو درصد وزنی 3 و 6 بصورت دستی ترکیب شد و به 5 گروه ( کامپوزیت بالکفیل بدون نانوذره، نانوکامپوزیت های بالک فیل(Ag/ ZnO/ 4A zeolite) با 3 و 6 درصد وزنی و (TiO2/ ZnO /4A zeolite) با 3 و 6 درصد وزنی) تقسیم شدند. برای تعیین ثبات‌رنگ رزین کامپوزیت‌ها را داخل مولد قرار‌داده وکیورکردیم. قبل از پروسه‌ترموسایکلینگ با اسپکتروفوتومتر رنگ هرنمونه را تعیین کردیم. سپس نمونه‌ها را در مدت زمان دو، چهار و شش هفته در محلول‌های از پیش آماده شده ( آب مقطر، چای و نوشابه پرتقالی) قرار‌داده و درپایان، هربار رنگ نمونه‌ها را با استفاده از اسپکتروفوتومتری تعیین کردیم. عمق‌کیور رزین‌کامپوزیت‌ها با تکنیک استاندارد 2000 (4049)ISO اندازه گرفته‌شد. رزین‌کامپوزیت‌ها را داخل مولدها قرار داده و به مدت 40 ثانیه از بالا بصورت عمود کیور کردیم. قسمت‌های کیور‌نشده با یک‌اسپاتول برداشتیم و سپس ارتفاع رزین‌کامپوزیت کیورشده را در سه محل متفاوت اندازه‌گرفتیم. میانگین 3 اندازه‌گیری به‌عنوان عمق‌کیور گزارش شد. جهت تجزیه و تحلیل داده ها از نرم افزار SPSS نسخه¬ی 22 استفاده شد (0/05>P). نتایج: با اضافه کردن نانوذرات به کامپوزیت عمق کیور به‌طور معناداری کاهش یافت. عمق‌کیور کامپوزیت‌رزین حاوی نانوذره Ag/ ZnO/ 4A zeolite با 3 درصد وزنی کمترین اخلاف را با گروه کنترل داشت. تغییررنگ در کامپوزیت حاوی نانوذره TiO2/ ZnO /4A zeolite با 3و 6 درصد وزنی از گروه کنترل و سایر گروه‌های مورد مطالعه کمتر بود. بیشترین تغییر رنگ در نمونه‌های غوطه‌ور شده در چای دیده شد. نتیجه‌گیری: افزودن نانوذره TiO2/ ZnO /4A zeolite ثبات رنگ کامپوزیت‌رزین را افزایش می‌دهد. از طرفی افزودن هرکدام از نانوذرات باعث کاهش عمق‌کیور کامپوزیت‌رزین می‌شود؛ با این‌حال نانوذره TiO2/ ZnO /4A zeolite با 3 درصد وزنی از نظر ویژگی‌های بررسی شده، مطلوب بود.

عنوان انگليسی

Evaluation Of Color stability and Depth of Cure Bulk fill Composite Resins Containing Nanoparticles Of (Ag/ ZnO/ 4A zeolite and TiO2/ ZnO/ 4A zeolite)

خلاصه انگلیسی

Introduction: By improving the properties of resin-composites, this material is widely used as cosmetic restorative materials. However, the color change of resin composites is one of the most important reasons for the failure of these restorations. On the other hand, resin composites have disadvantages such as limited light penetration depth, and to overcome this problem, resin composites with high cure depth have been marketed as bulkfill composites. Studies conducted on some nanoparticles have shown that adding zinc nanoparticles to resin composites improves their mechanical and optical properties, and titanium oxide nanoparticles show desirable appearance and beauty properties. In addition, zeolite helps to maintain these properties in the composition by encapsulating metal oxide particles. Therefore, this study was conducted with the aim of investigating the depth of cure and color stability of bulk-fill composite resins containing Ag/ZnO/4A zeolite and TiO2/ZnO/4A zeolite nanoparticles. Methods and materials: After synthesizing the nanoparticles, the bulkfill flo opus composite resin was mixed manually with nanoparticles (Ag/ZnO/4A zeolite and TiO2/ZnO/4A zeolite) with two weight percents of 3 and 6 and divided into 5 groups (bulkfill composite without nanoparticles, nanocomposite). Bulk fillers (Ag/ZnO/4A zeolite) with 3 and 6% by weight and (TiO2/ZnO/4A zeolite) with 3 and 6% by weight) were divided. To determine the color stability of the resin, we placed the composites in the mold and vacuated them. Before the thermocycling process, we determined the color of each sample with a spectrophotometer. Then, we placed the samples in pre-prepared solutions (distilled water, tea, and orange soda) for two, four, and six weeks, and finally, we determined the color of the samples using spectrophotometry. The cure depth of resin composites was measured by ISO 2000 (4049) standard technique. We put the resin composites into the molds and cured them vertically for 40 seconds from above. We removed the uncured parts with a spatula and then measured the height of the cured composite resin in three different places. The average of 3 measurements was reported as the cure depth. SPSS version 22 software was used for data analysis (P<0.05). Results: By adding nanoparticles to the composite, the cure depth decreased significantly. The depth of cure of the composite resin containing Ag/ZnO/4A zeolite nanoparticles with 3% by weight had the least differences with the control group. The color change in the composite containing TiO2/ZnO/4A zeolite nanoparticles with 3 and 6% by weight was less than the control group and other studied groups. The most color change was seen in the samples immersed in tea. Conclusion: The addition of TiO2/ZnO/4A zeolite nanoparticles increases the color stability of composite resin. On the other hand, the addition of each of the nanoparticles decreases the cure depth of the composite resin; However, TiO2/ZnO/4A zeolite nanoparticle with 3% by weight was favorable in terms of the investigated characteristics.

نوع سند :پایان نامه (دکتری حرفه ای )
زبان سند : فارسی
استاد راهنما :مهدی رهبر
استاد راهنما :فاطمه دباغی تبریز
استاد مشاور :عزیز کامران
دانشجو :فاطمه سلیمی
کلیدواژه ها (فارسی):عمق‌کیور، ثبات‌رنگ کامپوزیت، رزین‌کامپوزیت بالکفیل، نانوذره
کلیدواژه ها (انگلیسی):Curing Depth، Composit’s Colore stability، Bulk fill Resin Composite، Nanoparticle
موضوعات :WU دندانپزشکی .جراحی دهان
بخش های دانشگاهی :دانشكده پزشكي > واحد توسعه آموزش
دانشکده دندانپزشکی > واحد پژوهش - پایان نامه های دفاع شده
دانشکده دندانپزشکی > گروه دندانپزشکی ترمیمی
کد شناسایی :16875
ارائه شده توسط : آقای فرهاد خدایی
ارائه شده در تاریخ :06 فروردین 1402 10:38
آخرین تغییر :06 فروردین 1402 10:38

فقط پرسنل کتابخانه صفحه کنترل اسناد

Document Downloads

More statistics for this item...